how to repair an oven

Gas and electric stoves and ovens are easy to operate and often easy to repair, mainly because they are designed for easy disassembly. Today we tell you how to repair an oven; either electric or gas stoves.

Most of the disadvantages that affect gas stoves include the installation and ignition of gas and fire in the oven.

Most of the malfunctions that affect the electric oven and the oven include the wrong heating element.

In this article, we will look at how the main parts should work in gas and electric ovens, and how to fix them regularly to avoid big and expensive problems.

The first step is to look within to identify the problem.

Caution: Before doing any work on the gas stove or oven, make sure that it is plugged in or shut off the power to the appliance by removing the fuse or breaking the circuit at the inlet or outlet.

separate panel.

If there is a ground wire in the range, disconnect it.

Also close the gas supply valve to stop the supply of gas to the appliance.

The gas oven cabinet is very easy to disassemble. This is how:

Step 1: Remove the screws holding the panel and remove the control panel. In the control panel, the buttons are adjusted by friction; shoot them straight away. Some heads can set screws at the bottom of the head;

Use a screwdriver or Allen to remove these screws and remove the finger.

Step 2: Remove the back panel from the control panel by loosening the set of screws around the edge of the panel.

To remove the front panel, remove the control panel and remove the screw that holds the decorative panel to the frame.

These screws can be hidden by molding or molding; Use a screwdriver to cut the molding, or remove several screws.

Step 3: To access the burner assembly, remove the burner, then the top of the range.

The entire cooktop should be raised and away from the cooktop or flipped and open at the back.

The oven door can be removed by pulling it up through the hinges on both sides of the door.

Some hinges have latches that must be opened before the door can be removed.

Step 4: If the cooking skylight is turned on, remove the screw from the panel necessary to gain access to the bulb.

Replace the burned out bulb with a new one of the same type and wattage; Check the end of the old bulb for this information.

Then, replace the retainer.

Step 5: If the oven light goes out, remove it and remove it from the oven. Replace the burned out bulb with a new one of the same wattage, designed for the oven.