how to remove bad taste from fridge water

Built-in refrigerator water dispensers are one of the world’s first luxuries that are easy to play with. The water is clean, fresh and thanks to the added filter, is generally clean. But despite this filter, sometimes the water that flows out is very not tasty. Today we seek to tell you how to remove bad taste from fridge water.

This problem is common even in new refrigerators.

Other times it starts later, getting worse until the water is very sweet. This can happen with any type of refrigerator, including Whirlpool, Frigidaire, KitchenAid, LG, Samsung, and basically any model with a refrigerator.

In some cases, this is a simple fix. But not always. When it comes to modern refrigerators, even the experts can use advice when trying to solve water problems.

“When it comes to the water that the refrigerator provides, over the years the manufacturers have revised their plans to eliminate waste in the system where the water can get old or sit,” Bob Tuck emails , who Mr. Appliance franchise in Florida. .

“Knowing this, our service professionals will often rely on manufacturers to guide them as they suspect areas or areas of concern.”

expert advice on how to remove bad taste from fridge water

1. Change the filter

Filters are not always a problem. And this is often the case. Jake Romano of John The Plumber in Ottawa, Canada says: “Sometimes [the bad taste] can be due to problems with the water, plumbing, mold or bacteria.” – usually it’s a filter.”

Refrigerator water filters don’t last forever.

On average, you need to replace them about every six months. So if you’ve changed your filter once – five years ago – this could be a eureka moment for you.

“The water may taste bad because there is bacteria growing in the old filter, or the filter has stopped working properly and the water is sweet like tap water (which can be dangerous , depending on the contaminants in the water,” says Brian Campbell

Effective filters remove all types of contaminants from drinking water, including:

• chlorine
• Volatile Organic Compounds (VOCs)
• Other contaminants may occur, depending on your location and source of water

But – and this is a big but – it’s worth pointing out that these filters are anything but advanced.

They don’t deal with issues like heavy metals and other types of harmful issues.

For these types of contaminants, a reverse osmosis filter is a better bet.

As the filter gets older, it can become overloaded and the gun gets dirty, so the weak water will pass right through the filter and splash right into your glass.

This is one of the reasons why you need to see the smell or taste.

There are other indications that filters may exceed their useful life.

You may find that the ice maker is not making ice fast enough, or it is not making ice at all.

You may also notice that the pressure of the water dispenser is much lower than before.

These are signs that the filter is clogged and needs to be replaced.

If the idea of ​​changing your water filter twice a year (up to $50 per person) doesn’t bother you, know that not everyone is convinced that this rate of change is necessary.

Inside the filter is the activated carbon found in most types of drinking water filters, but they can wear out quickly with moderate exposure to light.

But really, if you’re trying to solve a water taste problem, this would be the place to start.

And you don’t need to buy a filter from the refrigerator manufacturer. Off-label will also work well.

2. Check your water source

If your water source is poor, one filter cycle may not be enough to remove the remaining odors and flavors that make the taste sweeter.

“The smell of rotten eggs, sulfur or iron may not be a symptom of a failing water distributor, but it may indicate a bad water tone, a closed system or a break in the water,” who refrigerator repair e-mail Stephany Smith. department at Fantastic Services in London.

“To determine if the problem is with your plumbing system, your water, or the appliance itself, check if the tap water tastes good.”

In other words, if the water from all your faucets – not just the refrigerator – tastes good, well, you can know that the refrigerator itself is not the problem. It’s your water.

Smith says if utility workers repair a burst pipe or do other work on a nearby pipe, particles can get into the normally sealed container.

Once the supply is restored, you may notice an odor or taste that was not there before. Fortunately, this problem solves itself when the pipe is filled with fresh water.

3. Check if the dispenser is new or unused

If your refrigerator sits for a long time without dispensing water, the water that is already in the line can start to taste bad. Also, running cold water for a minute or two can improve the taste.

“Release trapped air by pressing the dispenser, button or switch every five seconds.

To ensure that you are drinking clean water, continue to follow the same procedure until you give 10- 15 glasses of water,” advises Smith. .

If it’s a new refrigerator, he says the water line can accumulate dust and debris during manufacturing, posing a health risk to anyone consuming the water.

He recommends rinsing the water dispenser inside with distilled alcohol to clean it (dispose of ice in a storage bag before doing this.)

“Before starting anything, turn off the water, and the tube where you want to pour 2-3 cups of alcohol. After that, let the drink sit for a few seconds and dilute the process by adding about 8.5 cups of water,” he says.