how to hang curtains without drilling in 3 easy ways

Today we give you a simple guide into how to hang curtains without drilling. The guide includes 3 easy ways and requires no expertise. Fixing curtains to anchors or drywall requires drilling, which damages most of your wall panels.

If you are hanging your curtains temporarily or you want to avoid creating a gap, learn how to hang curtains without running into your wall.

What is a curtain rod?

A curtain rod is a vertical rod or hardware that you use to hang curtains or drapes in your room after installation. There are different types of curtain rods and drapery options to accommodate different home improvement budgets when enhancing home decor.

For example, some curtain designs may include grommets near the top of the curtain for mobile installation. Other types of curtains can be attached to the rod using a cover hook or cover ring.

When the bar is to be hang without a hole

Installing curtains without holes is sometimes a personal choice; other times, the situation demands it.

Here are some examples where hanging curtain rods without nails, drywall anchors, or screws may be your only option:

1. Not enough space around the window:

If your hardware extends beyond the window trim or frame on either side of the window, you may want to slide the curtain rod into the window square. In some cases, you can hang curtain rods from the ceiling above the window. For more difficult window directions or large windows where window treatments are not available, your best strategy for privacy or light control may be DIY curtains.

2. Installing Heavy Drapes:

If you don’t install heavy drapes, blackout curtains, or heavy accent fabrics, you can use a non-woven option to protect your drapery. There are many types of curtain or valance options that are light enough to install tension rods or adhesive strips compared to rings.

3. Can’t Install Curtain Tiebacks:

If you’re a renter, even a small hole in the drywall to install a curtain or tieback can cause an angry response from the landlord. In that case, you may benefit from non-destructive options, such as adhesive strips, removable mounting hooks, or non-destructive mobile designs.

In homes that use plasterboard instead of traditional wall hangings, it can be easier to hang curtains from the ceiling and hook them to the ceiling.

How to hang curtains without drilling: 3 ways

To hang curtains using a non-destructive installation method, try one of the following options:

1. Fix the hardware on the adhesive hook.

Adhesive hooks or adhesive strips are a variety of mounting hardware that you can purchase in different sizes and strengths. Hook strength varies between four and twenty pounds of holding power per hook.

Renters can also benefit from hanging curtains and other items with adhesive hooks, as removal is easy and unlikely to damage your wall surface. Just pull the bottom of the adhesive strip and the flexible material will be released on top.

2. Use a magnetic curtain rod.

This option is only possible if you hang something on a metal door or window frame. These metals must have metal with a metal to initiate a magnetic connection. Manufacturers produce many magnetic rods for heavy curtains; However, you can pay for strong magnets to hang heavy curtains.

3. Use tension rod curtains in window frames.

This design is especially popular for shower rods that do not have a rod pocket. You can use these same patterns to hang different parts of curtains for windows. Use a tape measure to determine the length of the curtain and keep the tension rod at the correct height.

Make sure the stem is smooth and flat to make contact with the slice. Twist to extend the rod, and each end will apply pressure to the window frame without damaging it.

The rod design can hold twenty to forty kilograms of suspended weight.