Stockholm
21 Nov, Thursday
-4°C
how to Fix iPhone Stuck in Recovery Mode Loop after Update

how to Fix iPhone Stuck in Recovery Mode Loop after Update – 4 solutions

This article is about how to Fix iPhone Stuck in Recovery Mode Loop after Update.

Apple designed Recovery Mode for iPhone to troubleshoot or fix some iOS issues.

However, recovery mode can sometimes cause us problems.

The most common situation is that the iPhone is stuck in recovery mode too long or after an update and cannot be booted normally.

Therefore, this is the problem we will solve in this article. We are going to show you four effective ways to fix iPhone stuck in recovery mode loop from back to use.

how to Fix iPhone Stuck in Recovery Mode Loop after Update

  • Method 1: Fix iPhone stuck in recovery mode loop by Force Restart
  • Method 2: Fix iPhone Stuck in Recovery Mode Loop through iTunes Restore
  • Method 3: Fix iPhone Stuck in Recovery Mode Loop with Third-Party Tools
  • Method 4: Fix iPhone Stuck in Recovery Mode Loop by DFU Restore


Method 1: Fix iPhone stuck in recovery mode loop by Force Restart


Before taking any other corrective action, try to force restart your iPhone, which can allow your iPhone to successfully remove the recovery mode and start automatically.

To force restart, just press and hold a combination key on the iPhone that is not connected to the computer.

For iPhone 6 or earlier, press and hold the Power and Home keys at the same time.

Hold them until the Apple logo appears on the iPhone screen.

For iPhone 7/7 Plus, press and hold the Power and Volume Down keys at the same time. Hold them until the Apple logo appears on the iPhone screen.

iPhone 8 or later:

Briefly press the volume up button.

Press and quickly release the volume down button.

Then press and hold the power button until the Apple logo appears.

If you tried to force restart the phone several times, but your iPhone is still stuck in recovery mode, switch to another method.

Force restart iphone


Method 2: Fix iPhone Stuck in Recovery Mode Loop through iTunes Restore


Using iTunes to restore iPhone to factory settings is the second feature in iPhone’s recovery mode loop.

You need a PC or Mac to follow these steps.

Step 1: Make sure the latest version of iTunes is installed on your computer. Step 2: Connect iPhone to computer using Lightning USB cable.

Step 3: iTunes on the PC will automatically start showing a dialog box that says “There is a problem with the iPhone and should be updated or restored”. Select Restore.

select Restore


Step 4: Follow the screen prompts to continue. iTunes will download a software update for iPhone and restore it when the download is complete.

restore the iphone


Step 5: Just connect the iPhone to the computer and wait for the restore process to complete.

If everything goes well, your iPhone will come out of recovery mode, restore and update properly, when the boot up is taken.

After that, you can update your iPhone as a new iPhone or restore all your information from a previous backup if you have one.

Method 3: Fix iPhone Stuck in Recovery Mode Loop with Third-Party Tools


If you tried the previous two methods, but your iPhone is still stuck in recovery mode, do not give up.

Other iPhone Passcode Refixer tools can help you solve this problem with high success rate.

iPhone Passcode Refixer is a professional iPhone Unlock tool, mainly used to remove a variety of iOS passcodes to unlock iPhones / iPads.

But its lock screen Unlock feature can also help you get iPhone from recovery mode properly and update iOS to new version without any problem.

These are the steps.

Step 1: Download and install iPhone Passcode Refixer on PC.

After installation, the equipment was installed.

Step 2: Pressially open the lock options lock options and main interface of this device. On the next page, click start to continue.

select Unlock lock screen
Step 3: Now connect the iPhone stuck in recovery mode to the PC with an Apple USB cable, then click Next at the bottom right corner of this tool.

The software will immediately detect your iPhone and load your device information.

Click Next
Step 4: Then, the tool will ask you to download the software package for your iPhone.

Just click the download button and the download will start automatically and complete within minutes.

click download
Step 5: Finally, you will come to another screen.

Click the Unlock button. press unlock
Step 6: Once the Unlock process is triggered, your iPhone will not exit recovery mode, delete all information about you, and update iOS to the latest version.

The whole process only takes a few minutes.

Keep your iPhone connected to the computer to ensure that the entire process is completed without interruption.

When your iPhone has finished restarting, you can re-set up and use it without any problems.

iPhone restart

Method 4: Fix iPhone Stuck in Recovery Mode Loop by DFU Restore


If none of the above works for you, DFU mode is the last method you can use yourself to get your iPhone out of recovery mode.

However, the success rate of this process is relatively low because it is said that many users, even some technicians, can put the iPhone into DFU mode well.

Therefore, we consider this method as a last resort.

However, you can try it if other methods don’t work for you.

Again, you will need a PC or Mac to follow these steps.

Step 1: Make sure the latest version of iTunes is installed on your PC or Mac. Step 2: Connect the problem iPhone to the computer through the iPhone Lightning cable and make sure that iTunes is open on the computer.

Step 3: Put the iPhone into DFU mode by following the steps below.

iPhone 6 and earlier: Simultaneously press and hold the power button and the home button for 8 seconds.

After 8 seconds, release the power button and hold down the home button until iTunes says “iTunes has detected the iPhone in recovery mode”.

iPhone 7: Simultaneously press the power button and the volume down button for 8 seconds.

After 8 seconds, release the power button and hold the volume down button until iTunes says “iTunes has detected the iPhone in recovery mode”.

iPhone 8 and later: Quickly press and release the volume up button, then quickly press and release the volume down button, then press and hold the power button until the screen goes black.

Once the screen goes black, press and hold the volume down button while continuing to hold the power button.

After 5 seconds, release the Power button and hold the Volume Down button until your iPhone appears in iTunes.

Once iTunes says “iTunes has detected an iPhone in recovery mode“, release the Volume Down button.

Step 4: Click OK on the dialog box that says “iTunes has detected the iPhone in recovery mode…”

click OK


Step 5: Then you can click Restore iPhone in iTunes interface to restore your device.

After the restore is complete, you can update using your iPhone.

Conclusion


Above are all the ways you can do by yourself to fix iPhone stuck in recovery mode loop.

If it is unfortunate that none of them work for you, the problem is probably caused by the hardware and you need to go to an Apple repair shop to fix your iPhone.

a

Magazine made for you.

Featured:

No posts were found for provided query parameters.

Elsewhere: