how to fix a leaking showerhead

The process of how to fix a leaking showerhead is really easy. Showerheads can start to leak if they rust, get clogged or have a lose connection. You will need basic tools to conduct a thorough check on any of these possibilities.

Step 1. Turn off the water supply

Find and turn off your water main. This will avoid unpleasant surprises later. There may be some trapped water that will come out, so it’s a good idea to keep a towel nearby.

Step 2: Remove the Showerhead

You will need a wrench or pliers to do this. Cover the plumbing nut with a piece of old cloth. Then take a good grip on the nut or the connector and turn gently.

Step 3. Clean the shower head thoroughly

how to fix a leaking showerhead

When the water is turned off, the next thing is to remove any dirt and grime that can affect the performance of the unit, leading to bad water and obstructions that can cause a trap.

There are dedicated cleaning products that work well, but another good method is to mix distilled white wine in a pot of water and heat it up.

The result is a good cleaner that doesn’t contain harsh chemicals that can harm the shower.

Remove the shower head and add it to the mixture, let it sit for a few minutes before moving it around with a toothbrush to remove any stubborn dirt. This should open up any dirt and improve the showering experience.

If you are not replacing your shower head with a new one, you can clean it before putting it back in place. Soaking it in plain white wine overnight will completely remove any rust or calcium.

If any remains, add rust, calcium and lime waste directly to the shower head. Do the same with your shower hose; rinse it with vinegar or a sieve to remove any build-up. clockwise.

There may be old plumber’s tape wrapped around the thread of the shower hose or around the connection between the shower head and the shower hose.

Remove it and clean the area. Iron works well. You want to make sure the head and pipes are clean before you connect anything. Take a new piece of plumber’s tape and wrap it around the thread of the shower hose

Be sure to press it with a thread, because this helps to prevent leakage. Now is the time to connect your old or new shower head. You will be able to do everything by hand, even making the connections stronger.

Remove the towels or taps you use to protect your tub, turn on the water again, and run the shower to test your performance. Check for leaks in the mains or threads. Close the connections until the shower head stops leaking.

Step 4. Check O ring

Check the o-ring or washer as this is the part that prevents any water leaks. If it looks worn or damaged, it’s time to replace it with a new one.

If everything is fine, just put the tape and thread on the end of the pipe. This will help create a secure seal and prevent wires from getting caught.

Step 5. Turn on the shower head and turn on the water

Firm the shower head with your hands until it is absorbed before re-sealing it with the adhesive.

Finally, turn the water back on and make sure it’s working properly. Turn off the shower and check for signs of leaks.

The actions taken should hopefully solve your problem.

Conclusion

how to fix a leaking showerhead is not necessarily complicated. You only need to have a thorough check at the entire showerhead especially where joints are involved. The most common causes of leakage are lose connections and wearing out. Regular maintenance can go a long way in preempting all these issues.