How to Clone a Hard Drive to Another on Desktop Computer in windows 10 – 5 steps

This article is about how to Clone a Hard Drive to another on Desktop Computer. Where you may need to use a professional system and partition creation software – a third party Cloner.

• It is mainly used when you want to upgrade, duplicate or move your hard drive to another new hard drive without system installation or data loss.

This page will show you how to use Cloning software to open a hard drive on the other and computer desktock.

How to Clone a Hard Drive to Another on Desktop Computer

It’s not common for users to move or clone a hard drive on the other. If you want to upgrade your old hard drive to a new hard drive; Plan to replace the original hard drive with a larger or similar hard drive in case the computer crashes, etc.

Please follow these steps to copy the original hard drive to the new hard drive by running a third-party tool such as Cloner.

Once the copying process is complete, you can boot the computer with a new hard drive. Now, let’s see how it works!

Step 1: Install a new hard drive on your desktop computer, restart the computer to go to Disk Management to initialize it, then right-click on this hard drive and select the Easy New option.

When the New Easy Setup Wizard appears, specify the disk space and drive letter for the hard drive.

Also, you can divide the hard drive into two or more partitions as needed.

Step 2: Install and launch Cloner, which will show you how many partitions are on your computer, including those on your new hard drive.

Also, you can know the partition type, driver letter, total / free size and file format.

Step 3: Click the Copy option on the left side.

Select the source of the original hard drive and the destination of the new hard drive. Click the Start button to begin cloning.

start the hard drive clone to the new hard drive
Step 4: After clicking the Start button, a window will appear telling you that this operation will make the destination partition.

To continue, you must click the OK button.

Click OK to continue
Note: If the destination is not a blank partition, it must be supported because the copy process will format the destination partition.

Step 5: When there is “Enough Information!” quickly, it means that the cloning process partition from one hard drive to another is done in a short time.

To completely copy the hard drive to another drive.

You should continue copying other partitions to the new hard drive, repeating steps 3 and 4 above to copy them to the correct partition.

When you have successfully copied the drive to the new hard drive, you should exit the software and restart the computer.

Press and hold the required key to enter the BIOS during the boot process.

And configure the computer to boot from the new hard drive.